Welltech FXSO Gateway In SIP V.1.2 Instrukcja Użytkownika Pobierz pdf (Strona 31)

FXSO SIP Gateway User Manual Document Ver.: 102

Released Dec., 2004

3.4 Line Configuration

The Line configuration will show the status of the registrations and the ports. It

includes the hunt group, hotline, and no answer forward configuration. Press

the Line configuration button to enter configuration table (see figure 3.4)

Figure 3.4: Line Configuration

u Type – Show the type of this port. There are only two types of this gateway.

One is FXS type another is FXO type. It couldn’t be changed.

u Hunting Group – Define the group number of this port. When the port is

busy, the call could be transferred to another port in the same group.

u Hotline – Enable or Disable the hotline mode. The hotline mode will be

enabled if you enter the hotline number. The default setting is disabled.

u FWD Type – This version could support the call forward with the Proxy.

Users could define the forward type in this table. The call forward could

only support the FXS port as so far.

n Disable – This selection will make the forward function disabled.

n Un conditional – This selection will enable the un-conditional forward

function. Every call will be routed to another destination whatever the

port is busy or not.

n Busy – The selection will enable the busy forward function. Every call

will be routed to another destination if this port is busy.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 99 100

Brak uwag

Welltech FXSO Gateway In SIP V.1.2 Instrukcja Użytkownika Strona 31