Welltech SPCI2S Intel NetStructure SS7 Boards Instrukcja Użytkownika Pobierz pdf (Strona 45)

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2 Page 45

link

_slc - Signalling link code.

The signalling link code for the link which must be in the range 0 to 15. The

signalling link code must be agreed with the administration at the other end of

the link and must be unique within a link set. Usually the first link in a link set is

assigned the value 0, the next one and so on.

link

_adj_pc - Adjacent point code.

The point code of the signalling point at the remote end of the link. Should be in

the range 0 to 16383 for 14 bit point code operation or 0 to 16777215 for 24 bit

point code operation. (

Note that all links in a link set must have the same

adjacent point code

link

_stream - Signalling stream.

When linkn_timeslot is set to a non-zero value, the linkn_stream is the logical

identity of the E1 / T1 line interface (liu_id - in the range 0 to one less than the

number of LIUs fitted) containing the signalling link.

link

_timeslot - Signalling timeslot.

The timeslot used for signalling in the range 1 .. 31. For an E1 interface the

valid range is 1 .. 31. For a T1 interface the valid range is 1 .. 24. Alternatively

timeslot can be set to zero and the switch path set up manually using the switch

control messages.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 106 107

Brak uwag

Welltech SPCI2S Intel NetStructure SS7 Boards Instrukcja Użytkownika Strona 45